My DIY Center | Icon | DIY


Project Guides

Ask The Expert



Air Quality




Mold, Cleaning, & Safety


Low Profile Condensate Pump Kit | #4856 | 1-3/4” High

2 out of 5 based on 1 customer rating
(1 customer review)


The Low Profile Condensate Pump Kit is, first and foremost, a great condensate pump.  It can lift water up to 22’ so routing the condensate to a remote drain or sink is no problem.

Low Profile means the inlet ports to the 1/3 Gallon tank sit only 1-3/4” above the ground.

Kit includes Low Profile Condensate pump, 20’ of 3/8” clear tubing, a 12” section of 3/4” clear tube, and one hose clamp (for use between dehumidifier and pump).  The kit also includes wires to connect the pump to the dehumidifier if there is a problem with the pump; it will tell the dehumidifier to stop before there is an overflow!

Where does the water from the dehumidifier go?  Into a drain.  How does your dehumidifier water get to the drain?  A condensate pump.  The Low Profile Condensate Pump Kit is the perfect addition to your dehumidifier. The adjustable feed drain port can be adjusted during setup to sit between 1-3/4" to 2-3/4" on all Dehumidifiers.  The inlet port of the Low Profile Condensate Pump sits at only 1-3/4" high. This now allows both the pump and the dehumidifier to both sit on the ground.  (No need for cement blocks to raise the dehumidifier to be above the pump.) The Low Profile Condensate Kit (#4856) includes the top-rated DiversiTech CP-22LP pump, overflow wire set, 20' of 3/8" clear tubing, and 1' of ¾" clear tubing with a hose clamp to get the water from the dehumidifier to the pump. This model pump is manufactured by Diversitech, the largest manufacturer of equipment pads and suppliers of products related to the HVAC industry. The Low Profile Condensate Pump is the perfect addition to any crawl space dehumidifier. It quickly and efficiently diverts and pumps water to your nearest drain—no more worries about your crawl space dehumidifier overflowing and leaving puddles of water. Features:
  • Rated Voltage: 120 Volts/60 Hz
  • Rated Current Draw: 1.9 Amps
  • Maximum Head Height: 22 ft.
  • Flow Rate at Zero Head: 1.6 GPM
  • Product Weight: 4.7 lbs.
  • Inlet Height from Floor: 1.75"
  • LED status lights (Green, Amber, and Red)


My DIY Center

Additional information

Weight 8 lbs
Dimensions 11 × 15 × 8 in

Customer reviews

Rated 2 out of 5 stars
1 review
5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
1 star 0 0 %

1 review for Low Profile Condensate Pump Kit | #4856 | 1-3/4” High

Add a review

Use one of the allowed file type: jpg,png.

    Your cart is currently empty.

    Return to shop

    Read our Step-By-Step

    Project Guides

    Tackling a new project may seem daunting, but at My DIY Center, we arm you with all the info you need from start to finish. Whatever your project, our comprehensive step-by-step guides, and videos will answer all your questions.


    Add address